Making a an amp outta a PA and some speakers
- ZacJM
- Top Producer
- Posts: 211
- Joined: Mon Apr 26, 2010 1:58 pm
- Location: Texas
- Contact:
Making a an amp outta a PA and some speakers
My Cordovox is a semi-electric accordion and when I put it through my Marshall it doesn't come out totally clean, my problem is that I play in a church choir and last time we played my accordion wasn't audible during the mass and I need amplification. I have a PA system but the speaker I got with it is too big to drag into the church so I want to make something smaller. I was thinking of getting 1, or two, small speakers that would be about the size of a typical guitar amp, and put the PA on top and house it all in a plywood frame or something. My question is, 1) do they make/sell speakers that are around the size I'm looking for and 2) would this work/be worth doing. I'd rather not invest in another amp if I can cut corners and make something use-able outta what I got already
http://www.youtube.com/zacmoritz
Main instruments:
Wilson Bros. VM-100 Bogle Model
Reissue Epiphone Willshire
Marshall Mosfet 100 Reverb amp
Green Russian Fuzz Box
Cordovox Super V
Golden Cup Chromatic B-System
Main instruments:
Wilson Bros. VM-100 Bogle Model
Reissue Epiphone Willshire
Marshall Mosfet 100 Reverb amp
Green Russian Fuzz Box
Cordovox Super V
Golden Cup Chromatic B-System
-
- Top Producer
- Posts: 221
- Joined: Sun Oct 11, 2009 11:27 am
- Location: Philadelphia, Pennsylvania
- Contact:
Re: Making a an amp outta a PA and some speakers
ZacJM wrote:My Cordovox is a semi-electric accordion and when I put it through my Marshall it doesn't come out totally clean, my problem is that I play in a church choir and last time we played my accordion wasn't audible during the mass and I need amplification. I have a PA system but the speaker I got with it is too big to drag into the church so I want to make something smaller. I was thinking of getting 1, or two, small speakers that would be about the size of a typical guitar amp, and put the PA on top and house it all in a plywood frame or something. My question is, 1) do they make/sell speakers that are around the size I'm looking for and 2) would this work/be worth doing. I'd rather not invest in another amp if I can cut corners and make something use-able outta what I got already
You can check with www.tedweber.com and email them about your problem. They can probably reccomend something.
I know you said you did not want another amp, but have you tried one of these? http://www.ztamplifiers.com/products/lunchbox.html
They are pretty loud, and you can carry it and your accordion in one go. Of course you may also want to look at the Club 12 for more bottom end.
Return to “Amp Tech Q&A and Repair Shop”
Who is online
Users browsing this forum: No registered users and 88 guests