Source for roller saddles?
Posted: Tue Jan 19, 2021 8:40 am
I noticed a really strange problem on my Fillmore reissue, don't know how I missed it before but the roller saddle for the low E, seems to be too narrow so the string is not fully seated in the saddle like the rest of the strings. The low E is about .5 mm higher than the rest of the strings.
I couldn't work the roller saddle loose, and it seems that vintage mosrite bridges don't fit on the japanese reissues so am not sure what to do.
Anybody know where I can get a set of roller saddles at least?
I'm using 9 gauge strings, surprising even that is too big...i've also cut a piece off the low e string and checked if it would fit into any of the other saddles, but no dice
I couldn't work the roller saddle loose, and it seems that vintage mosrite bridges don't fit on the japanese reissues so am not sure what to do.
Anybody know where I can get a set of roller saddles at least?
I'm using 9 gauge strings, surprising even that is too big...i've also cut a piece off the low e string and checked if it would fit into any of the other saddles, but no dice