Re: Operation JRM2 engaged
Posted: Thu Jan 29, 2009 12:32 am
Hey Kev,
here's the measurements I've taken. I did everything in mm's with my digital caliper. The following measurements is starting right at the end of the zero fret where fretboard begins.
The first double dot inlay 82mm bass side
the first double dot inlay 83.5mm treble side
2nd double dot inlay 141mm both sides
3rd double dot inlay 195.50mm both sides
4th double dot inlay 242mm both sides
Ovtave dot inlay 304mm
1st single dot inlay 356mm
2nd single dot inlay 386mm
3rd single dot inlay 413mm
last single dot inlay 436.5mm
----------------------------------
the size of the actual dot inlays: 2mm side fretboard markers, 1.75 top fretboard markers
-----------------------------------
distance between double inlays:
21.25mm 3rd fret
22mm 5th fret
23.50mm 7th fret
25mm 9th fret
--------------------
distance between dots on the octave inlay:
14mm from bass side dot to the middle dot
13mm from the middle dot to the treble side dot
---------------------------
all measurements I've done putting the caliper to the center of the dot inlay for the most accurate reading. and all the dots are pretty accurately center on the fret board. hope this helps.
here's the measurements I've taken. I did everything in mm's with my digital caliper. The following measurements is starting right at the end of the zero fret where fretboard begins.
The first double dot inlay 82mm bass side
the first double dot inlay 83.5mm treble side
2nd double dot inlay 141mm both sides
3rd double dot inlay 195.50mm both sides
4th double dot inlay 242mm both sides
Ovtave dot inlay 304mm
1st single dot inlay 356mm
2nd single dot inlay 386mm
3rd single dot inlay 413mm
last single dot inlay 436.5mm
----------------------------------
the size of the actual dot inlays: 2mm side fretboard markers, 1.75 top fretboard markers
-----------------------------------
distance between double inlays:
21.25mm 3rd fret
22mm 5th fret
23.50mm 7th fret
25mm 9th fret
--------------------
distance between dots on the octave inlay:
14mm from bass side dot to the middle dot
13mm from the middle dot to the treble side dot
---------------------------
all measurements I've done putting the caliper to the center of the dot inlay for the most accurate reading. and all the dots are pretty accurately center on the fret board. hope this helps.